NLA parts. Alternatives?

m5bb

m5bb

Well-Known Member
Site Donor $
Messages
2,086
Reaction score
921
Location
Peachtree Corners, GA
Looking for these parts.
These are used with the pedal bracket/steering column support.

Let me tell you this support bracket is one bugger to get out. Yikes! 35111108687 SUPPORTING BRACKET


35111108673 CAP (12/68 to 11/75)

35111103543 GASKET

I'm sure I can make up something for the gasket but the "cap" is a molded piece?

Gary
 
Gary,

i thought i had the cap, but i don't - broken. you are probably going to have to get one from coupeking, coupeguy or lajolla.

the gasket you could probably make ... but the cap piece???
 
Thanks Scott, I call La Jolla.

Still haven't gone back to the parts car.
Probably going to the Mitty one day this weekend.
 
Just called La Jolla. Carl answered, wow.

No part available that he knows of.

Suggested making one with some high density foam.
 
rsporsche said:
i have the bottom half of one - if that helps Gary.
Click to expand...

Not even sure what a whole one looks like as I think part of mine was missing and I believe it was the top half.
Like to look at that. Maybe I could use for a pattern to make one.

Gary
 
Pedal Box.png


Reviving this thread because I need to make the gasket (part #11 in the image). Any recommendations for material such as high density foam?
 
Be sure to select a foam that has closed cells. This will prevent it behaving like a sponge.
Neoprene foam would do the job.

Polyurethane foams tend to degrade by humidity over 5-10 years time, they crumble like seat cushion foams do. (Also pu foam). I would not choose that.
 
I have the CS Werk one. I sprayed it with urethane similar to bed liner material to help hold it together. Yes its very fragile.
 
You must log in or register to reply here.
Back
Top