Not mine. Re-chromed early rear bumper

deQuincey

Quousque tandem...?
Site Donor
Messages
8,435
Reaction score
2,460
Location
BIO - 43°15'46.5"N 2°56'03.7"W
ask him about chroming process, if he says a magical word (element Cu) you can trust the chroming process
if he only says Ni + Cr, no good
if he does not know which kind of process was done, no good
 

jmackro

Well-Known Member
Messages
2,463
Reaction score
728
Location
San Juan Capistrano, Ca.
ebay ad: said:
I purchased for a 2002 hoping it would fit. I had the bumpers trued and then stripped and re-chromed. It was then I found NO fit for 2002.

This is a guy who bought an e9 bumper expecting it to fit a 2002. Then he had it straightened, stripped, and re-chromed before checking whether it would fit. You think such a person would understand how the bumper was plated?
 
Last edited:

WISE9UY

Well-Known Member
Site Donor
Messages
577
Reaction score
62
Location
Carmel, Indiana, USA
Also note that the center-section is not part of the deal. I asked. Also it is for a 2000CS not a 2800/3.0 because there is no provision for the rubber.
 
Top