Pedal Supporting Bracket and Link to Booster

S

Sonny Crockett

Member
Messages
15
Reaction score
0
Location
Sweden
Hello,

I´m an "old" member here...My e9 has been a sleeping beauty for a couple of years but now it is time to wake it up again. I got a lot of help from you guys when I swapped engine to a S38B36..But now it is back to "basics" with a M30B35 but with "banana-intake". With the S38 I had to take the brake booster from a 02 but now I want to use my original.

Could somebody please help me, if you look at the picture I attached, is this how the linkage to the brake booster should look? If you don´t know but know somebody I can ask please let me know..I have searched but not being able to find anything. Also, if anybody knows anyone in Europe that might have a complete pedal bracket for a manual 2.5 CS I´m interested in buying. Any support is welcomed. Thanks ;)
 

Attachments

  • IMG_1333.jpg
    IMG_1333.jpg
    438.4 KB · Views: 67
Good evening,
May be these pictures are helpful for you?
There are several pedal brackets (serie I, II and injection??)

BTW the first pictures is a type I e24 and is simular for my e9

And there is the e9 manual available on this forum.
 

Attachments

  • IMG_5879.jpeg
    IMG_5879.jpeg
    358.7 KB · Views: 50
  • IMG_5880.jpeg
    IMG_5880.jpeg
    348.1 KB · Views: 39
  • 11540d39-9877-42ef-a540-1b4bd06e475f.jpeg
    11540d39-9877-42ef-a540-1b4bd06e475f.jpeg
    234.3 KB · Views: 41
  • IMG_4879.jpeg
    IMG_4879.jpeg
    516.1 KB · Views: 43
  • IMG_1420.png
    IMG_1420.png
    420.9 KB · Views: 60
Last edited:
Hello, thank you so much for both pictures and the information..! I have another type if brake booster, I have the thinner but wider one. I don't know which serie but maybe you can tell? My car is a manual 2.5 CS and was built in June 1975. Sine I need to buy a "new" bracket I will for sure need that information. .
 
Thanks again! I have never seen mine before it was modified. The "tube" to the booster is "open" downwards. I guess that is the way it is suppose to be..

I have been searching of pictures of "my" booster, but hasn´t been able to find. Most have the thicker one..

But you really helped me a lot already.
 
coolclassicclub.com

BMW 2.5 CS - Cool Classic Club

Onze 2.5 CS begon zijn leven in Bern, Zwitserland. Daar ontving de Bayerische Motoren Werke mevrouw Hausfrau in 1975. 19 jaar later werd de auto overgenomen door de eerste Nederlandse eigenaar. Hij verkocht hem op zijn beurt in 2008 aan de laatste eigenaar. Sinds de C(oupe) S(port) in Nederland...
coolclassicclub.com coolclassicclub.com
Here I see the smaller type booster (pancake)
 

Attachments

  • IMG_1421.jpeg
    IMG_1421.jpeg
    255.2 KB · Views: 61
Sonny Crockett said:
Thanks again! I have never seen mine before it was modified. The "tube" to the booster is "open" downwards. I guess that is the way it is suppose to be..

I have been searching of pictures of "my" booster, but hasn´t been able to find. Most have the thicker one..

But you really helped me a lot already.
Click to expand...
The open tube goes to the manifold. Vacuum side
 
Correct, it is "pancake" they are known as then I presume..

I meant the "tube" or pipe that connects the booster to the bracket, but I understood what you meant.
 
Ok, sorry my bad again. And if I understood the discussion in the link you sent open tube goes with pancake booster. So the one in the link you sent me should be the correct one.

But I don´t understand what from the open tube goes to the manifold, vacuum side?
 
Thank you, if you could take a photo of it or if somebody else has a photo of the rod that are supposed to connect to the pancake booster - all that would be perfect.
 
First step is figuring out what you have. Original bracket does not usually require modification to simply install a 2002 booster; presume a smaller diameter longer 2002tii booster would have been used. If it was shortened/repositioned/re-angled as well then different story. It is the tii booster that gets modified with longer rod.
1736874286104.png
1736874908414.png
 
I understand what you mean (I hope) but I want to find a "new" original bracket and attached to my original booster, which is the pancake model. So if you look at my first picture I guess the connection between the booster and the rod is not original?
 
You must log in or register to reply here.
Back
Top