budgerian
Member
Tonight I'm off to Switzerland to remove the a/c from a E3 that is going to be broken for spares.
As I will need the double pulley, my question is:
Is the pulley held in place by the six or eight small nuts inside the pulley or by the fearinducing big one (36mm) in the middle?
I have a 36mm nut with a long breaker bar, but would be somewhat releaved if I don't have to use it..
Roger
As I will need the double pulley, my question is:
Is the pulley held in place by the six or eight small nuts inside the pulley or by the fearinducing big one (36mm) in the middle?
I have a 36mm nut with a long breaker bar, but would be somewhat releaved if I don't have to use it..
Roger