E9Paradise
Member
I have recently acquired a '74 E9 and I have been slowly getting it road ready.  I drained the engine, the transmission and the rear end.  The manual says the capacity on the rear end is 1.5 liters so I pumped in 1 liter and then did the second liter thinking the fluid would start flowing from the filler hole when it reached 1.5 or so liters.  I pumped in at least 1.75 liters and it wasn't coming out of the filler hole.  I stopped there and plugged it.  I'm pretty sure this is not a limited slip.  
Does anyone know if the 1.75 liters I put in there will be too much or should I have kept going until it started draining from the filler hole?
Thanks! John
				
			Does anyone know if the 1.75 liters I put in there will be too much or should I have kept going until it started draining from the filler hole?
Thanks! John
