rear window & regulator disassembly

[cfzurn]

Hi,
I'd like to disconnect the rear side window glass from their regulators and frame assemblies in order to properly clean and grease them. I've removed the nuts on the 2 bolts that clearly go through the glass, but the glass doesn't budge. So I can't get the glass apart from the rest of the assembly. Is there some trick I'm missing, or some other attachment point?
Thanks,
Chris

 

[x_atlas0]

When I took mine apart for the first time, the glass was practically glued to the bottom gasket, which in turn was mostly glued to the frame holder on the regulator. Your best bet is to gently pry the holder open on one side then try to shimmy the glass out. It is pretty fragile stuff, though, so do be careful.