Rebuild kits for Calipers & Master Cyl. F & R - 3.0 CS

[aguirola]

Where is the best source for these parts? Pelican has them, rather pricey.
If I must, then I must

While at it, Aeroquip or similar brake hoses.

Thank you very much!

Regards, Alberto

 

[Dick Steinkamp]

Try Rockauto.com

 

[stphers]

RM European or FCP

 

[Stevehose]

eBay also

 

[Cornishman]

Jaymic in the U.K.

 

[halboyles]

Most all caliper kits available only supply 4 of the EPDM o-rings between the caliper halves. If you have vented rotors/calipers you will also need to order 4 more of the o-rings which can be hard to source. Pelican Parts has a compatible o-ring: https://www.pelicanparts.com/More_Info/90135192810.htm?pn=901-351-928-10-M33

 

[aguirola]

Thank you very much for the alternative!
Any ideas on the master brake Cylinder rebuild kit?
Mine is mirror shiny on the inside, but the rubber, is brittle and needs to be changed.

Regards, Alberto

 

[Cornishman]

Thank you very much for the alternative!
Any ideas on the master brake Cylinder rebuild kit?
Mine is mirror shiny on the inside, but the rubber, is brittle and needs to be changed.

Regards, Alberto

Jaymic in the U.K. sell the seals for the master cylinder. We have post from the U.K. to all over the world

 

[HB Chris]

Just be careful as there are two different size masters.

 

[aguirola]

Thank you Chris, mine has a 23 on the barrel.