steely dan
Member
Hi Guys
I write this asking if you can help or point me in the correct direction.
I have recently restored my early E24 which has the dreaded twin Ate servos as ,I believe , fitted to RHD E9's.
Ironically the only original components left in the braking system are the servos.
After 400 miles post restoration driving I have found that one of the two servos has developed a very slight weep . I have cleaned all the fluid and am trying to establish the source of the leak but have to consider that it's seeping past the rearmost seal of the cylinder. So far I have drawn an absolute blank in sourcing any seal kits for them and the two quotes for overhaul are rather expensive .
I ask if you guys know of any source for seals for these units .
I'm based in Ireland .
Thanks
Don
I write this asking if you can help or point me in the correct direction.
I have recently restored my early E24 which has the dreaded twin Ate servos as ,I believe , fitted to RHD E9's.
Ironically the only original components left in the braking system are the servos.
After 400 miles post restoration driving I have found that one of the two servos has developed a very slight weep . I have cleaned all the fluid and am trying to establish the source of the leak but have to consider that it's seeping past the rearmost seal of the cylinder. So far I have drawn an absolute blank in sourcing any seal kits for them and the two quotes for overhaul are rather expensive .
I ask if you guys know of any source for seals for these units .
I'm based in Ireland .
Thanks
Don
