Restauration d'un coupé 3.0 cs de 1971

[hadrien]

Bonjour
J'ai décidé de faire restaurer mon coupé E9 de 1971 ( carroserie, peinture, révision moteur, sellerie ). J'ai commencé à le démonter.
quelqu'un pourrait il me dire comment démonter les garnitures en bois des portières.
D'avance merci
Hadrien

 

[D-jetronic]

PM envoyé

 

[CSteve]

Photos, please. English if possible for this mono-lingual driver. Can't wait!!

 

[tdgray]

it’s easy Steve… just highlight the text and left click for translate. The internet is wonderful… sometimes.

 

[eriknetherlands]

Was the question for hints to remove the wood pieces on the doorpanels, or perhaps the entire part with the wood pieces?

When you remove the doorpanels, you will see (if original) a felt strip. if you pull that away it will reveal 4 (perhaps 5? ) scmal scross head screws. remove them.
Then push the black metal plate up, it is still held to the metal doorframe with clips with teeth inside the tp chrome piece, that have been sunk over the top edge of the steel door carcas. You have to push the black metal plate +chrome par +wood upwards to unlock those teethed clips.
some info & pics here:

Removing wood trim on door

I've done a search and found no good reference for removing the wooden door trim near the top of the driver's door. I've removed the door card and all the stuff needed to get it off, but can't see a way to remove the wood. I have one very small portion of the wood that needs to be refinished...

e9coupe.com

The wood pieces are screwed on to the metal carrier from behind, little cross head screws.