Salvaged 3.0cs Parts For Sale: Manual Swap, Disc Brake Susp. & More!

Bmwphatpat

Active Member
Messages
54
Reaction score
8
Location
Canada
Hi everyone, I have a bunch of E9 parts that are now for sale!


With considerable effort, I collected these E9 parts from a wrecked/salvaged BMW 3.0cs coupe that was unfortunately given up on. Sad I know, but I’d love to see these parts live on with another E9 coupe! Pictures of the wreck, the VIN, and confirmation that the previous owner was a member here are discussed in this thread: http://www.e9coupe.com/forum/threads/3-0cs-parts-value.25515/


I’m in Calgary, Alberta, Canada and local deals are welcomed, however I’m willing to work with buyers to ship items too (shipping cost is not included in prices).


BMW E9 3.0cs Suspension and Brakes For Sale:

I have most of the suspension, and braking system, and pretty much everything needed to swap a drum brake E9 to a disk brake setup. If you have a 2800cs with drum brakes, these parts are a bolt on upgrade!

- Front struts including brake calipers, rotors & wheel hubs $320
a2aff31a63227f3f848d09fa542d1cea.jpg


- Rear suspension drop out including: $950 SOLD
o Subframe
o Trailing arms
o Side loader differential
o Cv axles
o Sway bar & bushings
o Wheel hubs
o Brake rotors & calipers
e7e3db01e798ff0eb4e421d948035595.jpg

ee56392131c7b7369b5784c12c142b2a.jpg

fb63ce2fe2285ab21277787304bd6799.jpg


- Brake booster & master cylinder $115
67b321be8f0f1de4feeacc85d001baa5.jpg



BMW E9 3.0cs Manual Transmission Swap Parts:

I have many parts required to complete a manual swap on an E9 coupe:

- 4 Speed Getrag transmission, shifter assembly, crossmember, brackets $250
c6a438509c536dcfa4732513e75e642e.jpg

e3888f1fb50252b304e982856288f75c.jpg


- 4 speed flywheel $40
5f4bce4a0436eaa67a10b3448fb836d3.jpg


- 4 speed driveshaft $115
2737bbc375aeb64f629b10c7eb59fb49.jpg


- Manual pedal assembly & clutch master cylinder $250 SOLD
ab1f9f4df474d8618310057fd02eb771.jpg


Note: I also have a Getrag 265/6 - 5 speed OD manual transmission if that is preferred over the 4 speed, bellhousing not included (keeping the M20 bellhousing) $550 SOLD
62f07586f6a0746c20a1125292f84fc8.jpg



Miscellaneous E9 parts for sale:

- Hood (steel), nice shape $420 SOLD
ab509aaed332cd12224aec2349c1a8cd.jpg

880aaa08023dc172baecbe4f4238f415.jpg

8cf78efb3942a08f159c958e7fc35528.jpg


- Trunk torsion bars/springs, c/w lever arms, spacers, hardware (held the trunk up properly) $150
0c257afdf8279e32298a02dc16593411.jpg

178f30026d5f37553f2eed02bd1441c6.jpg


- Trunk hinge arms $40 SOLD
1977d387e24b3a180b84dbad17a6d37b.jpg


- Rear seats (no center or sides) fabric is tired, good cores for recovering. $300 SOLD
ded68a87d98bd7e5d6d35ab0c2dcd76f.jpg


- Front bumper tube bushings $20
cb9f395d38e22388390199201825f2bb.jpg


- Ignition modules $30
a0fc8f785344d837826cf7f559f69568.jpg



Prices are in USD, and are based on feedback from members on this forum (summarized in the discussion thread mentioned above) and I believe are fair, but let me know if something is out of whack.

Preference will go to buyers buying packages and multiple items.


Thanks for looking!
 
Last edited:
Not sure about the driveshaft, but the transmission and clutch pedal is a match. You don't need the bulky assembly. You just need the clutch/brake pedal and the big bolt (and spacers).
 
I hope this isn't too rookie of a question, but where do the "front bumper tube bushings" go? I am looking at the parts diagram (and my car) and do not see them.

Wait a sec... I think I just answered my own question. Is this a '74 or later car?

Thank you in advance!
 
Bumper bushings go in the front frame rails and yes I think it's a late car.

All sold items are marked as such, everything else is still available!
 
Back
Top