Seal parts

[d-ace]

Anyone out there worldwide know where these parts can by purchase at a reasonable price? Especially also the service of good quality bumper re-chroming and Interior Wood Restoration?
Thanks


Year
1971
Make
BMW
Model
CSI
Fjord Blue

Description Qty
Rocker Cover rubber seals 4
Front Windshield Seal
Front Windshield Molding left and right 2
Windshield Joint 4
Rear Windshield Molding left and right 2
Rear Windshield Seal
C-pillar rubber gasket 2
Left and Right fender molding 2
Quarter Window gasket base molding left and right 2
B-pillar vertical gasket left and right 2
U-shaped rubber channel 2
Quarter Window small rubber back seal 2
Quarter Window Interior Rubber Squeegee Seal left and right 2
Quarter Window Interior Felt Squeegee Seal left and right 2
Quarter Window Exterior Rubber Squeegee Seal left and right 2
Bottom Door Seals 2
Door main seals left and right 2
Door Vent Squeegee seal 2
Door Glass Felt Squeegee left and right 2
Door Glass Squeegee seal left and right 2
Door molding edge seal (sold in meters) 4
Door Rear Seals left and right 2
Vent seals left and right 2
Forward underhood seal
Underhood Insulation
Rear Underhood seal
Firewall Underhood seal
Underhood seals for rear corners of hood left and right 2
Sublet for Services: Interior Wood Restoration
Sublet for Services: Polishing and Re-Chroming

Thanks, contact me here with PM.

 

[dave v. in nc]

parts

I would start with Blunt Tech on the oem seals, etc. (Steve Petersen) is one of my favorite resources, and a great guy to deal with...and arguably the least $ of anyone out there.
Dave V. in NC

 

[x_atlas0]

Thankfully you can still get the seals from most vendors (Since BMW still makes and sells them) but they sure aren't cheap. I got my primary door seals a while back for ~400 each when the going rate was ~600.

 

[Ed G]

I would start with Blunt Tech on the oem seals, etc. (Steve Petersen) is one of my favorite resources, and a great guy to deal with...and arguably the least $ of anyone out there.
Dave V. in NC

+1

http://www.e9coupe.com/forum/showthread.php?t=8333&highlight=blunt

 

[Stan]

Speedway

Call Dan Ross at Speedway in Santa Ana CA for all metal polishing needs. He polished and ceramic coated my kidney grill and aluminum trim and it looks terrific!

 

[vince]

I had 'Maderia Concepts' refinish all of my wood pieces about 8 years ago. They did a beautiful job but it was expensive. It sounds like Bella22 is who to go to now, many satisfied customers and a great price.

 

[d-ace]

Anyone have a website for Bella22? What is a ballpark price for just the dash or complete coupe?
How about bumper re-chroming? Anyone in Canada or Mexico since the USA is EPA shut-down, especially on a regular price.

 

[gdub0717]

Bella22

http://www.e9coupe.com/forum/showthread.php?t=11257