Selector rods needed

[halboyles]

I need one selector rod from the early coupes (>'74) and one for the '74 coupes. Parts 14 and 15 (?) in the diagram. Happy to pay for the part and shipping.
Thanks,
Hal

 

[sfdon]

I am going to shop today and will look

 

[halboyles]

I am going to shop today and will look

Thank you!

 

[rsporsche]

@halboyles what is the link of the selector rod you need?
curious (for info to put into the FAQ) - what is the selector rod length for the 4 speed and what is it for the 5 speed conversion

 

[sfdon]

No Go Hal- threw them away


Found one!

 

[halboyles]

That definitely looks like the early version. I could use that. Let me know how much to send over to you. Thanks so much.

 

[halboyles]

what is the selector rod length for the 4 speed and what is it for the 5 speed conversion

I think the 5 speed version is 141mm on the holes center to center. It looks like the OEM version is about 151mm.

 

[sfdon]

Ummmmm- how much money you got?



How about 1.00 for the rod and 19.00 for shipping?

 

[halboyles]

Ummmmm- how much money you got?

I think I could afford the $20 after I get my VA check this month!

 

[Stevehose]

I might have one Hal I will look this weekend

 

[halboyles]

I might have one Hal I will look this weekend

Thank you Steve. I now just need the '74 on version. It should have posts at both ends perpendicular to the rod. It is almost the same as the '74 on 2002 selector rods.

 

[Stevehose]

Sorry Hal, no luck so far, I don't think I would have the later version anyway.

 

[halboyles]

Sorry Hal, no luck so far, I don't think I would have the later version anyway.

Thanks for checking anyway Steve.

 

[sfdon]

Sorry Hal - been slammed at shop and the packs/post office kid is out for a while.
I will ship today.

 

[halboyles]

No hurry Don. We're heading off to 02 Fest this weekend.