Speaker grill

[BonitaCS]

I'm going to replace the instrument cluster a po had in the center speaker location with speakers and need to make a grill. If someone had the time to measure the width, height, number of slots as well as the length & width of the slots it would be greatly appreciated!

Scott

 

[whalem6]

Here are the dimensions you need
w=180mm or 7 3/32"
h=111mm or 4 3/8"
slots=3-4mm or 5/32 just over an 1/8" 11 total
side before slots and after=10mm
top and bottom 12mm, 16mm it is not perfectly centered top to bottom
thickness of face=3mm or 1/8"
rear panel between screen and face=6mm or 1/4" ply
w=71mm or 6 3/4"
h= 100mm or 3 13/16-7/8"

 

[BonitaCS]

Cool, thanks!

 

[CSteve]

I have a grill in very good condition. A small piece of the material behind the wood is missing. Otherwise fine.

Let me know if you are interested.

Steve