Set of Stahl headers for a BMW e9. These were removed from my 1974 BMW 3.0cs (when i replaced them with a conventional manifold/downpipe setup). They are in good working condition with no visible holes in the tubing or cracks in the collectors or flanges.These are 1-1/4" o/d tubing from the head to the collector and ~1-5/8" after the collectors. The word "STAHL" can be seen stamped on the flanges, however the Stahl plate has fallen off (although the spot welds that previously attached it are visible). I've also posted this on my local (Vancouver, Canada) Craiglist in case anyone was curious. Local pickup only . . . sorry folks i an not able to ship these.
Stahl headers -SOLD
- Thread starter aalto
- Start date
stphers
Well-Known Member
Hi I may be interested in them PM me your number so I can give you a call I am in Port Moody.
Thanks, Rick Stephenson
Thanks, Rick Stephenson
these are headers sized for a stock engine - more specifically a 2.5 to 2.8L. most 3.0L use 1 3/8" primary tubes ... Korman used to state that 1 3/8" were the right size for their stage 2 engine with up to 240 hp.
FYI - This is what these headers look like if you get them ceramic coated.
You should have these Rick.
I have a set also , located in Sacramento , CA. Will be posting soon.