WTB: Front Passenger Seat Belt w/Retractor ( 74 Coupe)

[drvee12]

Looking for a replacement R/H Passenger Front seat belt assembly, the clockspring on mine is disintegrated. . This is the later version where the retractor mechanism fits in the upper rear passenger seat area behind the armrest cushion. Anyone have a complete belt assembly ? Or maybe just a clockspring so I can rebuild mine ? Or does someone sell these new needing no modifications ?

Thanks in advance.

 

[Bmachine]

I would highly recommend Al at [email protected] He rebuilt my '74 belts and did a top class job. He has done work for many on the forum.
After 50 years you really want brand new belts and fully rebuilt mechanisms by a professional in there

 

[drvee12]

Thanks, I will send him an inquiry.
Happy Motoring !

 

[Thomas76]

I have a few belt assemblies that may or may not be E9. If you take a couple pics or part numbers I can compare.

 

[drvee12]

will post some pics, thanks

 

[drvee12]

It is the clockspring in the reel that is toast, the belts themselves are in VGC so if anyone has a good spring I could repair the existing assembly. But open to any solution.

 

[Thomas76]

Hmm, none of my assemblies have that round plastic cover. Must be different.

 

[dave v. in nc]

I'll look...think I have a 73...I think you need a 74/75.

 

[dave v. in nc]

Is this what you need?

 

[drvee12]

that must be a pre 74 as my reel is hidden behind a panel. I think its the same spring inside I need but dont think it would make sense to part that complete unit out. Thanks Dave.

 

[dave v. in nc]

Yes, its a 73...good luck with the search.

 

[drvee12]

Thanks All, I am going to send both retractors to Al Erkanli per our fellow members recommendation above.

 

[kentvonseverin]

Looking for a replacement R/H Passenger Front seat belt assembly, the clockspring on mine is disintegrated. . This is the later version where the retractor mechanism fits in the upper rear passenger seat area behind the armrest cushion. Anyone have a complete belt assembly ? Or maybe just a clockspring so I can rebuild mine ? Or does someone sell these new needing no modifications ?

Thanks in advance.

I have two of the earlier version, if you can use them for parts