WTB: Rear Calipers (2) / -3.0 CS for vented rotors

[jim_hoyland]

WTB: Rear Calipers (2) / for vented rotors ; 19-510,19-511

I am looking for a pair of rear calipers that accomodate vented rotors. They do not have to be working, but the fasteners must be in good condition.
The part numbers are: 19-510 and 19-511

 

[sfdon]

It's a good idea to list your location.
Many people may be hesitant to ship especially old wet calipers.
Double o2 salvage will always have these used but usually best to buy off ebay.

35 bucks is good price for fresh one!

http://www.ebay.com/itm/7108-19-431...Parts_Accessories&hash=item2331e2f751&vxp=mtr



http://www.ebay.com/itm/Cardone-Dis...Parts_Accessories&hash=item1e7c438ca2&vxp=mtr

 

[Stevehose]

Verify that these are for vented rotors, I bought some and they were for solid discs despite saying they fit my year.

It's a good idea to list your location.
Many people may be hesitant to ship especially old wet calipers.
Double o2 salvage will always have these used but usually best to buy off ebay.

35 bucks is good price for fresh one!

http://www.ebay.com/itm/7108-19-431...Parts_Accessories&hash=item2331e2f751&vxp=mtr



http://www.ebay.com/itm/Cardone-Dis...Parts_Accessories&hash=item1e7c438ca2&vxp=mtr

 

[sfdon]

I think I may have posted the wrong #

Correct should be the 19-510, 19-511

Sorry Steve.

I owe you one (or two)

 

[jamesw]

You can get them already rebuilt from Rockauto.com for like $30 each plus core charge. Order the ones for the 633csi - which are the correct ones if you have vented rotors. I think the year is ~1980

HTH
James

 

[jim_hoyland]

Thanks for the info. I added my location: Huntington Beach, CA Looked at the eBay ads.

Actually I don't need a rebuilt caliper; I'm going to use the spacer and hardware to modify Porsche 914 rear calipers to accept vented rotors. So my need is limited to parts, bt mst be from rear calipers

 

[jim_hoyland]

Part # question.

What is the difference between the 19-510, -511 rear calipers and the 19-430,-431 rears ?

I've looked at some pics on eBay; the 19-510 and -511 calipers clearly have a spacer but were not original to the 3.0 CS. Am I correct that the 19-430, -431 calipers are OEM ? Do they have spacers between the two halves ?

 

[jim_hoyland]

Model no.s identified

Thanks for the assist, the calipers I'm looking for are 10-510 and 19-511
I am NOT looking for a "good" pair; but rather a pair that may need rebuilding. Reason is, I'm going to use the spacers and hardware for another project.

 

[rsporsche]

Jim,

which were the numbers that are correct for the 3.0cs rears?

 

[jim_hoyland]

Jim,

which were the numbers that are correct for the 3.0cs rears?

Correct numbers are 19-430 and 19-431

 

[rsporsche]

the 19-430 looks like a caliper for a solid rotor ... not a vented rotor.

 

[jim_hoyland]

the 19-430 looks like a caliper for a solid rotor ... not a vented rotor.

That is correct

 

[rsporsche]

then that would not be a caliper for a 3.0cs ... as it has a rear vented rotor.

 

[jim_hoyland]

*******Located******

Located a pair; thanks all for looking....