speaker cloth
Here's a report on options for replacing the cloth behind the wood grill on the center dash speaker. At least the options I could find.
First, I could not find any NOS cloth. The cloth was apparently attached to the grill from the factory, but the grill appears to be NLA. Even if it were, this cloth degrades over time and I wouldn't want any that was 40 years old.
Unbeknownst to me, there is a thriving subculture out there of antique radio nuts. Similar in many respects to old coupe nuts. There are several sources for tubes, knobs, wood and grill cloth for restoring old radios. Unfortunately, none of the cloth I could find from these sources was similar to our cloth.
Next option was grill cloth for new speakers -- home, commercial, whatever. Struck out again. Everything was too thick or patterned.
One online source mentioned a crazy idea that wound up being my choice -- women's hosiery, or stockings, or whatever they're called nowadays. After examining many examples (in the store, not installed), I settled on Hanes Alive Full Support Control Top Barely There. Go shopping for these without your sig other at a slow time and the store clerks will go out of their way to help a poor single man with this. The color is very close to the original scraps I could find hidden from exposure/fading, and the weave is pretty close to our cloth. I cut a rectangle from the panty part, which has a slightly different weave from the leg part.
Installation is pretty straightforward. Trickiest part was separating the grill from the wooden backing plate (the cloth is thoughtfully glued between the 2).
Should be good for at least another 20 hp.
Don