WTB two Weber 32/36 idle shutoff solenoids

dang

dang

Administrator
Site Donor
Messages
4,447
Reaction score
3,555
Location
Rocklin, CA
I need a couple shutoff solenoids for my 32/36 Webers if anyone has any to sell. Thought I'd check here first before ordering new ones. I have a few solenoids but they have smaller diameter thread. Different carbs I guess?

Dan
 
Dan - do you have a picture of the part you are seeking? I got a stash of carb parts a few years ago, but if its not a DCOE or DCOM part, I don't really know what I've acquired.
 
Ohmess said:
Dan - do you have a picture of the part you are seeking? I got a stash of carb parts a few years ago, but if its not a DCOE or DCOM part, I don't really know what I've acquired.
Click to expand...
I'll see if I can figure it out. The solenoids I have are really long and have a smaller diameter thread than my 32/36's so I assumed they were for something else. Zeniths maybe? I looked up "Weber 32/36 shutoff solenoid" on ebay and they all look the same... shorter with a bigger diameter thread. I'll search the Weber suppliers.
 
Some Webers had a long thinner idle shut off valve. Post 9

Rebuilding Weber 32/36 DGAV 33A Carburators

I will be rebuilding my carbs. The front secondary has stuck at WOT several times and they don't appear to have been well maintained. While I have rebuilt several carbs before, I was willing to have a company rebuild them except that the $300 each seemed excessive. I have ordered repair kits...
e9coupe.com e9coupe.com
 
You must log in or register to reply here.
Back
Top