Anyone have one of these they'd like to part with? I have the one on the driver fender. I'm on an insane mission to trick out my engine compartment 
WTB valve cover diagnostic port, bracket, and orange cover pieces (3)
- Thread starter Stevehose
- Start date
Shoot me a PM. I’ll loop in the generous individual who sourced these for me. I know I don’t need the fender port, but I’m not sure about the t-stat.
I'm not sure will dig around the parts bins.
Just for you purists; the CS werke part is a 3D printed one. I know that some us are really into that, but the print lines are quite visible. If you have a daily driver, it'll be a chore to keep it clean.
I actually bought one from CS werke, then realized mine wasn't missing, but painted black and covered in grease. I simply missed it when scannign for missing parts, so i ordered one. When i tried to install, i found my original but very dirty one.
I'll dig the CS werke part out of my parts stash and include a picture.
So I have one 3D printed one to sell as well. Half price of CS Werke for anyone who wants it.
I actually bought one from CS werke, then realized mine wasn't missing, but painted black and covered in grease. I simply missed it when scannign for missing parts, so i ordered one. When i tried to install, i found my original but very dirty one.
I'll dig the CS werke part out of my parts stash and include a picture.
So I have one 3D printed one to sell as well. Half price of CS Werke for anyone who wants it.
Thanks to the usual helpful suspects here, I have obtained both pieces from DE. Is yours the driver side cap or the tstat cap?
FYI - You can smooth the parts with acetone or isopropyl (depending on material choice).