Zenith Carbs...

[jranmann]

Searching for a newish set of Zenith carbs to replace same '71 2800CS...
(I assume the twin Zenith 35/40 INAT carburetors used on the 3.0CS
were jetted differently for the 2.8 or are the carbs a different model entirely?)

Might also possibly need a rebuilt distributor or at least the vaccum advance plate assembly...same vehicle.

Cheers!

Ran

 

[Sven]

Ran,

I have a set from a 72 3.0 CS. They worked nicely before I took them off. They have been off for a year, and were rebuilt 9,000 miles ago. I also have a used distributor with vacuum advance and retard. I would have to check to see if I can undo the fixing of the centrifugal weights (when I converted to EFI). I am thinking the carbs are worth $150 + shipping.

 

[jranmann]

Hi Sven...

Sent you a PM this subject...

Thanks!

 

[HB Chris]

Wish my Zeniths looked that clean!