Latest activity

What's new Featured content New posts Latest activity
  • ScottAndrews
    ScottAndrews replied to the thread 3D printer recommendation.
    I have had good success 3D printing in various materials with Xometry.com
  • ScottAndrews
    ScottAndrews replied to the thread Seat flip-forward lever.
    FWIW mine has these. I am going to retire these seats, so I may sell them as cores or part the trim out. Side knobs don't look much...
    • Screenshot 2026-03-21 at 9.24.56 PM.png
  • bdigel
    bdigel reacted to rsporsche's post in the thread Front Lip Spoiler with Like Like.
    no it helps aerodynamics. racing versions go lower to the ground and use a splitter to divert more air up, over and around the car +...
  • DWMBMW
    DWMBMW reacted to TomHom's post in the thread WTB WSW Large Knurled Nut with Like Like.
    At 1 o'clock a NOS head, at 3 o'clock Waldemar's remanufactured part at 6 o'clock one with the nut off at 8, 9 and 11 o'clock used...
  • shigeta
    shigeta replied to the thread Front Lip Spoiler.
    I had just messaged them this week and, unfortunately, they've discontinued it since they don't have the tooling to make more. I...
  • BarneyT
    BarneyT reacted to Scottpb's post in the thread 1972 Bavaria, Green with Saddle Interior with Like Like.
    Here are a few pictures of my 1972 Bavaria I purchased last November. It has not been restored and I think it is in amazing condition...
  • Ives
    Ives replied to the thread WTB WSW Large Knurled Nut.
    Thomas, Inspected my WSW shaft and it is in good shape. Checked the linkage and it works properly. I live in CA and my Coupes almost...
  • Ives
    Ives replied to the thread Front Lip Spoiler.
    I have a chin spoiler from H&B in Berkeley CA and it's an Alpina knock off. Besides aerodynamics and moving air the rectangular holes...
    • IMG_0044.jpeg
  • rsporsche
    rsporsche reacted to adawil2002's post in the thread Front Lip Spoiler with Like Like.
    Without the air dam the car gets unstable at speeds over 90. With the air dam, good suspension & 120+ is stable.
  • J
    Jimmi replied to the thread Front Lip Spoiler.
    Good thread. My car has a Kooglewerks chin spoiler. Here are a couple of pics for comparison to a full air dam like Andrew's.
    • IMG_6993.JPEG
    • IMG_6994.JPEG
  • adawil2002
    adawil2002 replied to the thread Front Lip Spoiler.
    Without the air dam the car gets unstable at speeds over 90. With the air dam, good suspension & 120+ is stable.
  • K
    Koopman reacted to Rudy3.0CS's post in the thread Seat flip-forward lever with Like Like.
    If you printed that 1mm oversized you could chuck it into a lathe and sand and polish it perfectly.
  • e9Leveque
    e9Leveque replied to the thread Seat flip-forward lever.
    I did try to polish it a bit on a bench sander with a soft brush, it’s a bit difficult because the plastic melts fairly easily. I’ll try...
  • Rudy3.0CS
    Rudy3.0CS replied to the thread Seat flip-forward lever.
    If you printed that 1mm oversized you could chuck it into a lathe and sand and polish it perfectly.
  • merdad
    merdad reacted to eriknetherlands's post in the thread NOS feeler gauges - 80 euro. with Like Like.
    First sets shipped, helped by @Ives who kicked me in the butt to ship 'em out. Made you guys a nice 3d printed box to help the postal...
Show older items
Back
Top