Latest activity

  • rsporsche
    you are very correct. i have it in the raw data and forgot to put it into the summary tab. i inserted a line into the wrong place and...
  • e9Leveque
    In the best way possible I am going to ignore you guys, lest you convince me to reevaluate my decision to forgo the rear wheel bearing...
  • ScottAndrews
    I think you have convinced me that this is a doable project, and the fact that I can then powder coat the rear brake plates and swing...
  • ScottAndrews
    Does anyone have any thoughts on applying CPES (clear penetrating epoxy sealer) to the non-veneered surfaces of the wood? Seems like...
  • Markos
    Markos reacted to ScottAndrews's post in the thread Coupe Ancestry project - summary with Like Like.
    Not to cause you more work, but @Stevehose sold his car, and another forum member bought it.
  • ScottAndrews
    Progress on the wood...With @TomHom's imminent wood dash arrival, I started work on the other parts. I bought only the two curved dash...
    • tempImagebXlYxj.png
    • tempImagePAm9AX.png
    • tempImage4BtjhS.png
  • e9Leveque
    e9Leveque replied to the thread Interior changes.
    Also good to know. And while costs always vary (by a lot) what has been your experience for such a build. It looks like I could often...
  • JMinPDX
    JMinPDX reacted to '69 2800cs's post in the thread M30B35-Free! with Like Like.
    No kidding! From a late E34 535i that was nicely maintained. Good compression, stacks of service records including the carfax. ECU...
  • ScottAndrews
    Not to cause you more work, but @Stevehose sold his car, and another forum member bought it.
  • Rudy3.0CS
    Rudy3.0CS replied to the thread Interior changes.
    A really skilled upholsterer can rebuild stock seats from the frame up with varying types, grades and densities of foam. This can result...
  • ScottAndrews
    Be sure to take the muffler off when you start it up. I once got a violation when I had a rusty old Bronco up on jack stands in the...
  • ScottAndrews
    Some little gifts arrived today. A spare M90 motor from a wrecked 1980 Euro 635, and an unopened NOS box of Bosch W9RLS "Silber" plugs...
    • Screenshot 2026-05-14 at 8.13.13 PM.png
    • Screenshot 2026-05-14 at 8.13.45 PM.png
  • ScottAndrews
    Interesting. Good advice about the gauge holes! I may do that with the ash tray slots as well.
  • RichenFamous
    RichenFamous reacted to '69 2800cs's post in the thread M30B35-Free! with Like Like.
    No kidding! From a late E34 535i that was nicely maintained. Good compression, stacks of service records including the carfax. ECU...
  • Markos
    Markos reacted to '69 2800cs's post in the thread M30B35-Free! with Love Love.
    No kidding! From a late E34 535i that was nicely maintained. Good compression, stacks of service records including the carfax. ECU...
Back
Top