Latest activity
-
rsporsche replied to the thread 2800CS on BaT.if they are working to a condition 1, their cost is exorbitant but there is attention to detail - significantly higher. i studied the... -
MHey all, Long time 2002 guy but love e9’s as much. Currently building another 1602 with an s14. Have a few e9 things I wanted to list...
-
I could name 15 things that speaks to their lack of attention to detail. EEC sticker on a US car, orange parts stickers were never on a...
-
StephenZ replied to the thread 73 POLARIS E3 BUILD...Slowly...Question on brake booster delete. I've been reading up and to clear the triple dcoe carbs, I think I'm going to delete the booster and... -
I know this car, have driven this car, The restoration is 10 years old. No rain ever, always garaged, 12,000 miles over 10 years, so it... -
"The car was purchased by the seller in 2008 and was restored and modified between 2015 and 2017 at The Werk Shop in Libertyville...
-
Rudy3.0CS replied to the thread 2800CS on BaT.I had heard that the Werkshop did high quality work. This is a pretty car but far from what I would expect a high dollar build to look... -
CSteve replied to the thread 2800CS on BaT.I know this car, have driven this car, The restoration is 10 years old. No rain ever, always garaged, 12,000 miles over 10 years, so it... -
Dick Steinkamp replied to the thread 2800CS on BaT."The car was purchased by the seller in 2008 and was restored and modified between 2015 and 2017 at The Werk Shop in Libertyville... -
jmackro replied to the thread 2800CS on BaT.The "in process" photos posted in this car's auction (specifically #300 - 322) do not inspire confidence. They reflect the kind of work... -
Markos replied to the thread 2800CS on BaT.I know I’m supposed to love the werkshop but I’ve yet to be impressed with the finish work on some of the e9’s they have done. This is...
-
Dick Steinkamp replied to the thread 2800CS on BaT.This bidder has done the same thing multiple times... https://bringatrailer.com/member/tableoak/
-
KDoes anyone have the MM of the feeler gauges? Thanks in advance.
-
rsporsche replied to the thread 2800CS on BaT.complete resto by the Werk Shop cost some serious coin ... with the high 1st day bidding, perhaps it sets a new high water mark for a...
-
jmackro replied to the thread 2800CS on BaT.Well, yea, but at least they brushed some paint on the inner panels. Well, those that were visible anyways. (BaT won't let me link to...
