E3 (UK) Tool Roll

E

E3_UK

Well-Known Member
Messages
276
Reaction score
74
Can anyone confirm if this tool roll would have been supplied with my 1972 UK spec' E3 2500 ?. The spanners and plastic screw driver handle are all stamped West Germany, there are no markings on the adjustables or spark plug socket. Not sure if the 17mm spanner should be bent like this, presumably not although it shows no signs of having been deliberately bent :




 
That's a 2002 tool roll, they are much cheaper in appearance and fewer tools obviously. However, the 2500 came with this tool roll per the parts book, I think 2.5CS was the same.
 
HB Chris said:
That's a 2002 tool roll, they are much cheaper in appearance and fewer tools obviously. However, the 2500 came with this tool roll per the parts book, I think 2.5CS was the same.
Click to expand...

Thanks. Had a look on Realoem and it does show this tool roll so looks to be original. I guess I should straighten out the 17mm, I have plenty of my own Frankenspanners to use !
 
HB Chris said:
It is original for a 2002 or your 2500. The 17MM came bent from BMW, on a 2002 it is used to adjust rear drum brakes!
Click to expand...

Phew, thanks, was just about to put it in the vice to straighten it !!
 
You must log in or register to reply here.
Back
Top