M30 B34 Complete with Harness, Motronic, MAF and Airbox

[WISE9UY]

Here it is. Ready to install M30 B34 complete with everything needed. Clean motor with harness in good condition. Removed from a 1985 635csi.

Included are pics of the motor with compression values per cylinder. I have a video of cranking to validate. Compression is a consistent 165/170psi per cylinder cranking from cold. I can add pics of the Motronic unit and MAF etc... just reach out to me.

Asking $720

I can palletize to send.

 

[twistinglane]

This is a US spec engine I presume?

 

[WISE9UY]

This is a US spec engine I presume?

Yes I expect it is. Accordingly I believe the compression is where it should be. The engine number is 40073547.

 

[WISE9UY]

Still for sale. Just clean it up on the outside, drop it in, wire it up, change oil, add coolant and go! I have an E9 specific 4-speed manual to mate up to this too.

 

[WISE9UY]

Bump.

 

[DAVE]

Do you not need the specific Motronic bellhousing to make this work?

Regards Dave

 

[WISE9UY]

Do you not need the specific Motronic bellhousing to make this work?

Regards Dave

I have the original 5-speed that came with the car or it would suit a gearbox already with the motronic bellhousing. Are you asking out of interest or just curious? I could possibly separate the gearbox from the bell housing.

 

[DAVE]

Just curious and trying to educate my self.
Dave

 

[Fernando Gutierrez]

I am interested in this,
I have a 73 bav I want to swap the motor in,
What are your thoughts on making this work?
Also would be interested if it came with the 5 speed,

Let me know thank you