Any pointers on how to remove the back panel on the upper rear section of the front seats? I have them separated from the bottoms already. Not sure if the panel just pops off or if their is more to it.
Disassembly of front seat back
- Thread starter milwaukeesk
- Start date
YES JUST POPS OFF
BUT ITS TIGHT
START AT THE MIDDLE
BUT ITS TIGHT
START AT THE MIDDLE
Thanks Alan. I’ll give it a shot
The aluminum trim is very fragile, bends easily, is riveted in place. Pull the panel away from the trim, then have a beer.
yea just put a beveled trimmed oak stick in the front and pry back
you can also start at the botttom to get the feel of it
alternate from side to side
you can also start at the botttom to get the feel of it
alternate from side to side