Thanks Gary, ordering today. Steve
Door seals - US source non OE
- Thread starter Gary Knox
- Start date
Thanks Gary, ordered yesterday. Didn’t even know I was missing them!
Great thread and note on the door catch caps too!
OK..........dumb question time please. What model car are you talking about. My 1974 E9 3.0csi Australian delivered, so presumably Euro equvalent car doesn't have those rubbers installed at the moment. Not saying thats correct, and I have to slam my doors but I thought that might have more to do with the door brakes and pins.
Peter,
IF you buy some of this, you might consider getting enough for both doors (or maybe enough for 6-8 doors for other owners). Shipping cost per seal for one door would be much less!
PM me for my shipping address if/when you are ready to make the purchase. Glad to be able to help.
By the way, the need to slam the door may be related to adjustment of the striker/receiver on the B pillar.
Cheers,
Gary
IF you buy some of this, you might consider getting enough for both doors (or maybe enough for 6-8 doors for other owners). Shipping cost per seal for one door would be much less!
PM me for my shipping address if/when you are ready to make the purchase. Glad to be able to help.
By the way, the need to slam the door may be related to adjustment of the striker/receiver on the B pillar.
Cheers,
Gary
All coupes have this rubber on trailing edge of doors, it isn't as hard as the surround rubber and shouldn't cause closing issues.
Thanks Gary. I'll get onto this today. Just got up and am about to go for a walk but more later. Thanks for your advice. First class,
Peter
Peter
Gary.
Hi Gary. It’s been 3 years since you posted this. I was wondering if this rubber held up well until (IIRC) you sold the car.
When I was looking for a trunk seal I finally found it at eEuroparts.com and they also have aftermarket seals. The OEM trunk seal at $66 is a good price. Not sure how good the URO seals would be but mybe worth a try.
www.eeuroparts.com
Shop – eEuroparts
Select your year, make and model to find the perfect fit European car parts at the best price! | eEuroparts.com
www.eeuroparts.com
I'm not 100% certain, but I think the link you sent is the trunk lid seal for an E10 (2002). I did not see the E9 part on their website.When I was looking for a trunk seal I finally found it at eEuroparts.com and they also have aftermarket seals. The OEM trunk seal at $66 is a good price. Not sure how good the URO seals would be but mybe worth a try.
Shop – eEuroparts
Select your year, make and model to find the perfect fit European car parts at the best price! | eEuroparts.com
When I took the part number into Maximillian you are right it shows 2002. However when I look up 2800CS in Maximillian it calls for this part number. The gasket is now on my 2800CS. Here is the Maximillian liink. Item 10
The eEuro search for the 2800 part returns a 2002 part. 51715776161 vs. 51715476161
Strange I will need to look at our 2002 and see what the difference is.
Either way it is on my 2800CS and it works well.