Old thread but applicable.
What has everyone used for the longer Clutch Slave Cylinder hose?
Thx
What has everyone used for the longer Clutch Slave Cylinder hose?
Thx
5-speed conversion question
- Thread starter CharlesJ
- Start date
SS from Carl
Yup. That's what I use.
I saw the extension called out in Carl's write up. Wasn't sure that was still the preferred method and if Carl was selling them. I am contacting him. Thanks as always.
I used a rubber brake hose with male/female ends I think and brake pipe.
Chris;
Just found this thread that is probably what you mentioned. Thx
Steel braided 5 speed conversion clutch hose
Just like the title states, I built these in 3 configurations depending on which type of slave cylinder you have. Pictured here is the hose used most commonly, with a slave cylinder exit pointing downward toward the ground. The hoses each have a hanger that can be secured to one of the through...
e9coupe.com