raulvargasdelos
Member
Looking for the part, it would sit on top of two Webber 26/32.
Wanted: air filter housing
- Thread starter raulvargasdelos
- Start date
I've got one $200 plus shipping. Color isn't quite right and some chips around the edges but all around good shape. You'll probably want to rattle can it or powder coat. Updated price.
...and you'll need adapter plates for Webers as well, right? As is it will fit only the Zeniths.
Try to find the adapters with the stud to hold the air cleaner centered over the carb. The more typical ones shift the air cleaner assembly about 1/2" rearward which requires redrilling the hold down holes in the air cleaner and makes it difficult to fit the hot air hose from the exhaust manifold shroud, the cold air intake hose to the front panel, and the hose from the valve cover to the air cleaner.
WTB...Weber adapters for stock air cleaner
I do have a pair of these, but they are the type that require that you redrill the holes in the air cleaner for the mounting studs and that relocate the air cleaner about an inch to the rear. I'd like to find a pair that mount the original air cleaner without redrilling. They will look like...
e9coupe.com
raulvargasdelos
Member
Thanks, can you upload a couple of pictures?, do you have the adapter as well?
I'll upload some pictures today, I don't know if it has the adapter but I'll open it up and take pictures, top and bottom. Maybe someone on the forum can tell us.
Hey @raulvargasdelos do you have 26/32's or 32/36's?
raulvargasdelos
Member
Sorry for the mistake, they are 32/36