NMNA: G265 Floor shift platform

ya, hard to tell from that picture.

Should look like:

1668461314434.png

1668461339160.png
 
We have these shift platforms just about ready for sale and I believe we can sell them for about $175. They are made out of stainless steel and include the second bracket that attaches to the tunnel. We will also be offering a DSSR made specifically for the conversion to the Getrag 265. Here are a couple of pics of the product being used to bench test a 265. SFDon played with one down in Fredericksburg, TX at the Texas 02berfest and seemed to think they were up to snuff!
We are in the final stages of also making the timing chain rotation tool. Just waiting for the knurled handle to be shipped to us.
I'll announce availability on the forum as soon as we have them ready to ship.
 

Attachments

  • 20221114_162928.jpg
    20221114_162928.jpg
    310.2 KB · Views: 122
  • 20221114_162939.jpg
    20221114_162939.jpg
    250 KB · Views: 112
  • Timing Chain Tool and G-265 Shift Tower.jpg
    Timing Chain Tool and G-265 Shift Tower.jpg
    321.3 KB · Views: 121
Mike I can help ya there if you're willing to part with a spare. I keep missing them when they pop up.
 
halboyles said:
We have these shift platforms just about ready for sale and I believe we can sell them for about $175. They are made out of stainless steel and include the second bracket that attaches to the tunnel. We will also be offering a DSSR made specifically for the conversion to the Getrag 265. Here are a couple of pics of the product being used to bench test a 265. SFDon played with one down in Fredericksburg, TX at the Texas 02berfest and seemed to think they were up to snuff!
We are in the final stages of also making the timing chain rotation tool. Just waiting for the knurled handle to be shipped to us.
I'll announce availability on the forum as soon as we have them ready to ship.
Click to expand...
I'll be up for one of these and a dssr when available
 
I found the shifter platform from a 1984 E28 with a 260/5 in my local PnP so I paid the $12 for it to see how it might be adapted to a 265. Where there's
a welder, there's a way. The 265 platform is on the right.

.
IMG_2635.jpg
 
You must log in or register to reply here.
Back
Top