FS: E9 Front Air Dam (Unpainted - Perfect Condition)

Paulaner

Paulaner

Well-Known Member
Messages
379
Reaction score
195
Location
WA, USA
I have a new, unpainted, perfect condition e9 front air dam for sale. I acquired this from Don back in Feb. Was in SF for a work trip and flew home with it in a surfboard bag. It's one of the ones from our very own forum member, Aguirola.

Its unpainted, never installed, perfect 10/10 condition.

I no longer need it as I will be purchasing an e3 specific one from a CCCA member here in Seattle.

I paid $500 and would be asking the same to recoup my cost so I can apply it to the other one. Lmk if there are any takers.
 

Attachments

  • PXL_20260805_212711486.jpg
    PXL_20260805_212711486.jpg
    407 KB · Views: 54
  • PXL_20260805_231126606.jpg
    PXL_20260805_231126606.jpg
    246.7 KB · Views: 49
  • PXL_20260805_231114080.jpg
    PXL_20260805_231114080.jpg
    236.7 KB · Views: 50
  • PXL_20260805_212808627.jpg
    PXL_20260805_212808627.jpg
    262.9 KB · Views: 49
  • PXL_20260805_212754305.jpg
    PXL_20260805_212754305.jpg
    442.3 KB · Views: 53
  • PXL_20260805_212725794.jpg
    PXL_20260805_212725794.jpg
    316.3 KB · Views: 50
  • PXL_20260805_212719068.jpg
    PXL_20260805_212719068.jpg
    305.8 KB · Views: 50
Paulaner said:
I have a new, unpainted, perfect condition e9 front air dam for sale. I acquired this from Don back in Feb. Was in SF for a work trip and flew home with it in a surfboard bag. It's one of the ones from our very own forum member, Aguirola.

Its unpainted, never installed, perfect 10/10 condition.

I no longer need it as I will be purchasing an e3 specific one from a CCCA member here in Seattle.

I paid $500 and would be asking the same to recoup my cost so I can apply it to the other one. Lmk if there are any takers.
Click to expand...

Thank you for the mention! Appreciate it ...
If anyone requests one, I will steer ((:) them to your direction .

Best,
Alberto
 
Ha! mine from Aguirola comes tomorrow in a very large box! A few days too late for me for your sale, would have been easy to pick up since we are local.
 
e9Leveque said:
Ha! mine from Aguirola comes tomorrow in a very large box! A few days too late for me for your sale, would have been easy to pick up since we are local.
Click to expand...
Whelp, I blew that opportunity. Want another one? LOL
Could have met up with you next Sat at the BMW CCA event in Woodinville.
 
Come on @mkent you need one of these. Make this sale easy on me and buy local. Your coupe needs some flare (I say that in the absolute nicest way possible as your car is a dream)
 
Paulaner said:
Come on @mkent you need one of these. Make this sale easy on me and buy local. Your coupe needs some flare (I say that in the absolute nicest way possible as your car is a dream)
Click to expand...
Thank you for thinking of me, Kyle! Air dams are way cool on E9s and this is very tempting......but I've decided to rock the stock front-end look on my '73. Plus, my Hardy and Beck wheels are currently being made and that has blown my coupe budget for 2026.
 
mkent said:
Thank you for thinking of me, Kyle! Air dams are way cool on E9s and this is very tempting......but I've decided to rock the stock front-end look on my '73. Plus, my Hardy and Beck wheels are currently being made and that has blown my coupe budget for 2026.
Click to expand...
No worries, Mike!
 
Thank you all for the great comments!
We strive to produce the best quality stuff, as less, simply does not make the cut.

Still have a lovely set of front and rear bumpers, for that extreme low diet, weight loss Rx :)

Kind regars,
Alberto
 
StephenZ said:
Man...does that fit the e3 nose? Of course I'm on the other side of the country...:-/
EDIT: just saw you're buying an e3 specific one...eh well..
Click to expand...
It fits, but would take some cutting, bending and shaping to make right. Its certainly doable, but instead of hacking such fine piece like this I would rather just get an E3 specific one from a guy here outside of Seattle.
 
Paulaner said:
It fits, but would take some cutting, bending and shaping to make right. Its certainly doable, but instead of hacking such fine piece like this I would rather just get an E3 specific one from a guy here outside of Seattle.
Click to expand...
Where is the cutting and bending mostly? I’ve read the e9 wheel well to front is a little longer than e3, it would need to be shortened a bit on the sides? Is the front mostly the same-ish after that? Just planning for future projects..
 
You must log in or register to reply here.
Back
Top