Given the amount of interest in the recent badge for sale, I went poking around a little bit. Many of you have been on here since the beginning, but I'm a relative newbie. So if someone wants to lay out the full history, please do so, but it appears that the previous version of this site was e9-driven.com and for reasons beyond my ability to identify that site went under. User @jhjacobs made the initial run of badges, but seems that was actually before the e9coupe.com site was live, and thus the "E9-Driven" across the top of the badge to honor the forum name at the time. I'll send a message to him but given that his last post was in 2017, I don't know if he is still active.
He made the pins at QualityLapelPins.com, they specialize in this sort of thing. I sent them photos of the pins asking if they still had the molds/dies they would have used but going to guess the answer there is no. So, let's say we take a crack at making up a new badge. I'm happy to be the one to coordinate collating orders, placing the order and dealing with the distribution. I think jhjacobs had made about 100 of the pins and patches, sounds like a pretty reasonable number to make up for current and future owners. The same design we decide upon can easily be used for patches which they offer or lapel pins, etc. We can also decide on the mounting method at the time of order - two holes for zip tie or mounting bracket.
Since @Lucas seemed to bring everyone's inner photographer out of the woodwork with his photo contest, let's try the same approach here. Come up with a design and post it to this thread, we can decide on the favorite and then work on orders. I agree with the rules for the photo contest Lucas had, but for this rules are different. Submit as many designs as you want and you are free to use AI to help with the design if needed. If everyone just wants to re-do the original one that works as well, although I might suggest that that could be an "alternate", since for all of the newer members the E9-driven part is a bit over our heads.
Posting here the E9-driven original badge as well as screenshot from QualityLapelPins homepage for a little bit of inspiration...
And also badge thread from 2018 with a lot of photos of BMW badges...
He made the pins at QualityLapelPins.com, they specialize in this sort of thing. I sent them photos of the pins asking if they still had the molds/dies they would have used but going to guess the answer there is no. So, let's say we take a crack at making up a new badge. I'm happy to be the one to coordinate collating orders, placing the order and dealing with the distribution. I think jhjacobs had made about 100 of the pins and patches, sounds like a pretty reasonable number to make up for current and future owners. The same design we decide upon can easily be used for patches which they offer or lapel pins, etc. We can also decide on the mounting method at the time of order - two holes for zip tie or mounting bracket.
Since @Lucas seemed to bring everyone's inner photographer out of the woodwork with his photo contest, let's try the same approach here. Come up with a design and post it to this thread, we can decide on the favorite and then work on orders. I agree with the rules for the photo contest Lucas had, but for this rules are different. Submit as many designs as you want and you are free to use AI to help with the design if needed. If everyone just wants to re-do the original one that works as well, although I might suggest that that could be an "alternate", since for all of the newer members the E9-driven part is a bit over our heads.
Posting here the E9-driven original badge as well as screenshot from QualityLapelPins homepage for a little bit of inspiration...
And also badge thread from 2018 with a lot of photos of BMW badges...