taylorcom
Well-Known Member
Hi all, After letting it sit for several months, I fired up my '72 3.0 CS and started out for drive when I noticed the clutch pedal was getting lower and lower and then gradually stopped working. My drive became a short trip around the block and I got home safely, but without a working clutch.
I checked the usual suspects and found the brake/clutch reservoir full and the bolt holding the clutch pedal in place. The current clutch was installed in 1990 but had been working fine until today. It worked normally as I backed out of the garage and started my drive, but then the pedal got lower and lower to the floor.
Could the problem be a failed clutch cylinder? Or am I due for a tow to the shop for a new clutch?
All advice is much appreciated.
I checked the usual suspects and found the brake/clutch reservoir full and the bolt holding the clutch pedal in place. The current clutch was installed in 1990 but had been working fine until today. It worked normally as I backed out of the garage and started my drive, but then the pedal got lower and lower to the floor.
Could the problem be a failed clutch cylinder? Or am I due for a tow to the shop for a new clutch?
All advice is much appreciated.