WTB a few trunk toolkit tools

[RichenFamous]

Looking to compete my toolkit for my early e3. I don’t need concourse judge worthy, but need to be able to be cleaned up and fit the early foam.

After reading through the toolkit thread, I am searching for:

All (3) open ended wrenches
(2) box wrenches
Valve tool
Possibly both pliers as mine do not fit the foam well.

Need shipping to Sacramento area.

Thanks in advance!

Here’s a pic of my kit:

 

[rsporsche]

try turning the big pliers over ...

 

[RichenFamous]

Bad picture. I’ve tried multiple jaw settings and orientations and they do not fit the foam. Same with the short pliers.

 

[rsporsche]

open the wrench a couple of notches and try again ... that will allow the handles to touch each other.

 

[RichenFamous]

open the wrench a couple of notches and try again ... that will allow the handles to touch each other.

I appreciate your input… Re-read post, then zoom in on this photo from HB Chris’ toolkit thread. There are differences in early and later tools. The slip joint pliers I have are from my e28. Not the same.
Done trying to prove I would like to buy early long handle pliers.

 

[HB Chris]

Yep, both pliers are of a later vintage. The 9” pliers are almost impossible to find and the early one is even harder. The small pliers should have a slight bend outwards at the end of the handle.

 

[e9Leveque]

Look at the recent post by @CSteve he had some tools there