WTB e9 CSi parts

[shanon]

Hi RnF,

Hollar if you are still seeking a tank, I have this one 55L with a sender collecting dust.

I am in the Sac/Jackson area.

-shanon

 

[RichenFamous]

Updated the list!
Thanks to all that have helped fulfill the list so far!
Weathers breaking so hopefully be more active on the coupe.

 

[eriknetherlands]

I have 4 old brass overflow tanks which are likely leaking.
I can get them desoldered, glass bead blasted and resoldered and pressure tested, and 2k black painted.
They would be show quality and priced accordingly.
Shipping from the Netherlands would be about +25 euro. Pm me for details.
Erik

 

[RichenFamous]

I have 4 old brass overflow tanks which are likely leaking.
I can get them desoldered, glass bead blasted and resoldered and pressure tested, and 2k black painted.
They would be show quality and priced accordingly.
Shipping from the Netherlands would be about +25 euro. Pm me for details.
Erik

Thanks Erik. Show quality is not in my vocabulary, lol. I’m trying to get the coupe back on the road first, the try to pretty her up…
I will definitely keep your access to quality in mind.
Cheers sir.

 

[Engrip]

I have 4 old brass overflow tanks which are likely leaking.
I can get them desoldered, glass bead blasted and resoldered and pressure tested, and 2k black painted.
They would be show quality and priced accordingly.
Shipping from the Netherlands would be about +25 euro. Pm me for details.
Erik

Hello Erik,
Greetings from Vermont USA. Do you have any brass overflow tanks remaining?
Jerry

 

[sfdon]

Cores or ready to install?

Don’t forget the plastic one is available and has never really been a problem!

 

[mark99]

I have center rear trim…View attachment 197262

Don, I am curious about these switch platforms, they look new made

 

[mark99]

Good day folks,

I have a 1972 3.0CSi and am hunting for the following driver or better (will consider all since condition is in the eye of the beholder) quality parts:

Needs:
Fuel tank
Coolant overflow tank
View attachment 200226
Rear fog light housing and red lens
View attachment 200227
Rear seat (only driver side needed)
Rear script (3.0 + CSi)

Wants:
Trunk boards
Rear under bumper/bumperettes

Please PM pics and price! PayPal ready. Located in the Sacramento area.

Also have e3 and 2002 parts to trade if that interests you.

Cheers,
Rich

did you find a gas tank? I might still have one from a 72 (not csi)

 

[eriknetherlands]

Hello Erik,
Greetings from Vermont USA. Do you have any brass overflow tanks remaining?
Jerry

I do, but one from @sfdon will be your best financial bet. Shipping and import into the US has become a bit of a pain lately

 

[sfdon]

Don, I am curious about these switch platforms, they look new made

Chris at cswerk makes them

 

[e9Leveque]

Chris at cswerk makes them

And remind me, difference between the AC and non-AC ones? May need to get one for my AC retrofit…

 

[Dlc]

the AC-one is much shorter at the top, as if needs to accommodate the faceplate:

Thread 'A/C faceplate and console position'

Jun 15, 2024

E9 friends,

I am reaching out for guidance in the finish of my ac retrofit :

What is the correct position of ac facdplate and center console gearshift cover?

Does the cover sit above the faceplate or are the parallel?
Is the cover shorter for ac than non-ac?

I am trying to fit this with my non ac car
Thank you
Dominik

• Dlc
• Replies: 13
• Forum: E9 Discussion

 

[sfdon]

Tanks are troublesome and expensive-

While Erik may have to ship them in, He likely can get them done less expensively than in California.

It’s a matter of time and materials

 

[TomHom]

...we had this question before:
Post in thread 'Does anyone know this measurement?' https://e9coupe.com/forum/threads/does-anyone-know-this-measurement.46977/post-413862