Search results

I don't know if all fuel cells are the same but in racing, I have seen the foam in the fuel cell deteriorate and break up. When I got mine, I asked about that and was told that if I totally drained the tank when not in use, it would last a long time. Mine has been in the car over 30 years...

My US spec'd 70 2800CS never had a charcoal canister. I had a heated discussion about it during a smog check one time before it reached the California smog check 'not required' date for the 70 model cars. There is a line that comes from the plastic accumulator in the trunk that goes directly...

I love the Barchetta. That steering wheel that sticks up higher than the windshield needs some more thought though.

I run side draft carbs on my Austin Healy Sprite race car. I thought side drafts were an advantage due to better air flow by having a straight shot into the heads with minimal corners to slow it. Yes, more gas gets in there but so does more air. The air fuel ratio should still be the same if...

I do not have side draft Webers on my Coupe. Mine are the JAM Engineering kit which is down draft and does have the oil vapors from the crankcase feed back into the air breather as is stock. I know of new cars that had direct fuel injection that were having problems with carbon build up on...

I thought carbon build up on the intake valve was usually caused by oil vapor from the PCV system. From what I understand it is most common with direct fuel injection engines. Carbureted or throttle body injected engines normally don't have a serious problem with carbon build up on the intake...

You guys make me fear ever selling my Coupe. o_O It will probably be done after I have passed on and will not have to deal with selling it.

I like the audio book and the movie. I listen to the book many times on long trips. A friend that told me about the book many years ago just recently saw the movie and did not like Kevin Costner as the voice of Enzo. It worked for me.

When they used my Coupe for the Karen Carpenter story, the dufus driving it must have thought it was an automatic because he tried to put it in gear without using the clutch. Fortunately, no damage was done.

I was ready to jump on these, but of course they don't match the lines of my 70 2800CS.

I understand the drop in rpm and said I would probably like it. However, I have driven between Costa Mesa and Monterey many times to and from the Historics at Laguna Seca running between 80 and 90 mph. It has been a long time since I have done it, but I think it was over a 5-hour drive. I...

I am not going, but that is a beautiful photo of your car and you.

I like the 4 spd in my 2800CS. Running at 80 mph results in the engine rpm at 4,000. That is just purring for that BMW engine. I am sure I would like a 5 speed with OD, but I don't feel the need to go to the effort to install one just to drop the rpm a little. I normally like my vehicles to...

When I did mine a long time ago, I recall making some kind of sleeve to pull it in place. I don't remember the details. That had to have been at least 40 years ago.

While I was looking at it, the bid changed to $65,000 right before my eyes. Magic!

Sounds good. I would like the entire piece for spare parts. Mine is working fine now with an old repair on it.

I am getting a fair amount of rain, but my house is in an area that would be very difficult to flood. My daily driver is a slightly lifted Ford Ranger with 33" tires, so getting around on the streets is usually not a problem.

I would take it, but I am sure shipping to California would be cost prohibitive.

This thread is so true. I used to think my Coupe was a mid-pack size car. The past few years when I walk out into a parking lot, I have noticed how small my Coupe is compared to the rest of the cars, but I would not trade it for any of them. Classic style is more important to me than size.

My washing process is similar to Wobodog's, but I do squeeze out some of the soapy solution from the sponge before putting the sponge to the car. I rinse off the soapy solution with a towel that is wetted with water. I do the rinse a couple times and then dry with a soft towel. In addition to...