Search results for query: WELTS

BTW - for anybody that has a set of original welts for the door / side panels ... please print the pdf and see if they are remotely close. they were close to mine, but a bigger sample comparison would be good.

...a pillar covers and fitted speaker covers up. These will need to come back off to reroute the sunroof tubes and also fit the leather a pillar welts. The pvc covering on the seat belts had also worn through and generally fallen apart. Some conduit and heatshrink on top and they look near...

Same thinking on my side; these are what germans call "Keder" if I'm right. Door welts in English? The door welts were discussed here as well, with few pics: Thread 'interior welts around door + side panels' https://e9coupe.com/forum/threads/interior-welts-around-door-side-panels.20348/

Yeah yeah. I spotted the missing welts, roundels on the vent window knobs, 1970 seats, black wipers, missing rivets on the Karman tag, touch up paint on the doors, wrong bolts in the upper door hinge, missing white caps in the doors/rear wells, wrong bolts on the HL panels. Yes we could go on...

Impressively thorough analysis, Erik. very useful. PS: remind me to never let you see my car.

...under the slide -release lever. So simple to solve as they are still available. Even available in stainless hoe on this forum! - missing door welts on driver door. (pic 206) - screws through door wood panel, on both driver and passenger door (pic 204 and 210) - wrong hose clamps on fuel...

My door jamb welts are 9.5mm. Didn’t measure the little ones on the door.

Thanks Mark. Yeah the welts look much thinner in your decon thread photo. I purchased the 8mm ones from cs-werke which are supposedly for this application but even those look too thick. If you had to take a SWAG at it, how thick would you say your welts are? Thanks again.

Yes, the door welts aren’t as fat either. I have pics of the door welts in the decon thread. May have the body welts also.

The metal trims and their welts mount to the body, not the door. The door has simple welts only.

I must be spatially challenged because I can’t seem to figure out which door welt goes where and how. As I understand it, the welts are supposed to PEEK OUT from the door card... but given the way I have laid these out in the attached photo, which is the only way to get metal trims to follow...

...- painted interior color 1. Kick panels (if not leather) 2. Door + Rear Side panels (if not leather) 3. Door pulls 4. Rear armrests (if not leather) 5. Welts between door panel and door Trim pieces - painted SEM ranger white 1. Headliner 2. Headliner molded panel 3...

...Seats & Panels Blinkers Rear trunk interior trim Front interior aluminum door jamb trim Rear interior aluminum door jamb trim Vinyl door jamb welts Under Column dash panel Parcel Tray wood/vinyl Pending: Front power window setup All Rubber Hot Ticket Still Available AC setup Bumpers...

Can someone post photos of removal / install of the rear window regulator and upper trim? deQuincey had an entire thread, but the photos are ruined by photo bucket what are all the holes along the vertical edges of the regulator for? I assume the install order is, the window regulator, the...

thanks, I worked on the lower rubber molding and vinyl welts and it makes sense now but so many parts I made a mistake, I put quite a bit of effort getting the ends of the dash wood close to the sheet metal, unfortunately there isn't room to get much of the vinyl behind there now New question...

I purchased the inner tubing for the front door welts from CS Werke. https://www.cs-werk.de/cs-werk-bonn-onlineshop/shop/nachfertigungen-fuer-bmw-e9/53_1_bmw_e9_keder_set/ I’ve received them and now had the opportunity to compare them to welts on another coupe. They look much thicker than the...

...my data points to two. Both cars were poorly maintained so more info from others is helpful. This is car #2 with tiny screws holding the door welts on. I also don’t think that any of the welts have actual plastic piping inside them. I’ve mentioned it before but they would be easy to make...

Don’t the original type work right like what W/N has? If the door cards‘ holes aren’t damaged and the door card covers are original......... https://www.wallothnesch.com/catalogsearch/result/?order=name&dir=asc&q=e9+türverkleidung

Hey Gary -- what are you using for fasteners to hold the door cards to the doors? I ask because I don't have these welts, primarily because I could barely get the door cards reinstalled without them and they appear to add even more thickness. If I could find better fasteners, I would...

Ahh that is because it is my search history. Give it a go with “welts”. Also try “welting”