2800 rear chrome

[Todds Coupe]

Does anyone know of or have the "2800" chrome trunk piece? Or any suggestions on how to reattach one that has the little "tits" broken off or damaged? Thank sguys!!

 

[Dick Steinkamp]

You could reattach with emblem tape. It is how trim like this is attached to modern cars. It comes in various widths and thicknesses.

 

[TomHom]

Popped up today:
Gerade bei #Kleinanzeigen gefunden. Wie findest du das?

Neuer Schriftzug Heck "2800" für BMW e9 CS - 51 14 1 810 563

Neuer Schriftzug für BMW e9 für die Kofferraumklappe "2800" Teilenummer 51 14 1 810 563 schon...,Neuer Schriftzug Heck "2800" für BMW e9 CS - 51 14 1 810 563 in Baden-Württemberg - Weingarten

www.kleinanzeigen.de

 

[Thomas76]

My car is 3 years into using that 3M tape above. It's crazy strong.

 

[Todds Coupe]

You could reattach with emblem tape. It is how trim like this is attached to modern cars. It comes in various widths and thicknesses.


View attachment 211082

GREAT! Thanks man!

 

[shanon]

+1 for the 3M VHB tapes (VHB = Very High Bond)
Have had my 2800 and CS badges stuck on for 20+yrs. It goes permanent after 30mins.....you have been warned...

 

[jmackro]

Does anyone know of or have the "2800" chrome trunk piece?

There was a recent thread about sourcing reproduction versions the "2800" chrome trunk piece. As I recall, the conclusion was "forget it" (of course, used parts may pop up from time to time). That thread pointed out that not only do the size and font have to be right, but the shape of the curve on the underside has to match the curvature of the e9 deck lid. So "2800" emblems for other BMW models won't fit properly.

If you have an emblem that is only missing its mounting nibs, consider yourself lucky. Mine is that way, and has been attached with that 3M double sided tape for many years. Cut it into narrow strips to go on the backside of the emblem, press it firmly into place, and you're set.