Rear rubber diff mount, check axles, cheap to rebuild. I just did my 2002 axles, never again!
Advice about next steps for my 72 coupe
- Thread starter HonaloochieBoogie
- Start date
When the rear subframe is out ask them to inspect for body failures (tears, split spot welds) in the diff mounting area and the two rear shock tower mounts. These are frequent to crack with upgraded engines
/stiffer suspension.
If everything is removed, inspection is easy and gives peace of mind.
/stiffer suspension.
If everything is removed, inspection is easy and gives peace of mind.
Next time I'm removing the rear subframe I'm going to install both of these to be able to adjust toe and camber.
Maybe now is a good time to replace the power steering pressure hose?
e9coupe.com
Maybe now is a good time to replace the power steering pressure hose?
FS: Reproduction E3/E9 Power Steering Pressure Hose 32411117565
Hello guys. I have reproduced the pressure hose for power steering. There are only 3 items available. $120 USD for a hose with shipping. Different shipping costs apply to other countries. Alvaro
e9coupe.com
HonaloochieBoogie
Well-Known Member
I dropped my coupe of yesterday at German Motorwerks. Here’s something I’ve never seen - a turkis bmw golf cart.
That shifter!
HonaloochieBoogie
Well-Known Member
German Motorwerks is making good progress on my coupe. Subframes are close to going back on. Brake calipers reconditioned, new stainless brake lines going in. In the meantime, with hurricane Sally pounding us with rain for 2 days straight, I’m spending time in the carriage house, detaining my other 3 cars. Spray on car wash, wipe. Wipe again. Apply light wax and allow to dry. Wipe, then wipe again with new rag. After 3 cars my back is aching.
