Assembling CSI engine

[koldo1]

Hi, I'm back at it again. I'm assembling the engine and I don't have as many photos as I'd like. I have doubts about where these tubes go, especially the thickest one; I've more or less located the smaller ones.

 

[Pittraider18]

Hi, I'm back at it again. I'm assembling the engine and I don't have as many photos as I'd like. I have doubts about where these tubes go, especially the thickest one; I've more or less located the smaller ones.

Throttle Body Pre-Heater coolant hoses? For cold start?

 

[koldo1]

Should be, any drawings?

 

[Fritzie]

Gerade bei #Kleinanzeigen gefunden. Wie findest du das?

BMW M30 Zylinderkopf 12500199 (Bj. 1980) E3 E9 E12 E23 E24 E28

Zum Verkauf steht ein BMW M30-Zylinderkopf, Teilenummer 12500199, mit einem Datumsstempel von 1980....,BMW M30 Zylinderkopf 12500199 (Bj. 1980) E3 E9 E12 E23 E24 E28 in Frankfurt am Main - Rödelheim

www.kleinanzeigen.de

Some pictures of a dismantled cilinder head.

 

[Ohmess]

Does the autobooks manual help? Perhaps Figures 1:16 and 1:18? https://e9coupe.com/tech/autobooks/autobooks_manual.pdf

 

[sfdon]

Look at block at cylinder 6
There is a fitting for a hose

Look at coolant pipe running alongside the block
There is a fitting for a hose

2 more at throttle body

2 more at AAV

Start at rear of block to throttle body

From throttle body hose to AAV to coolant pipe

Complete circuit

​

 

[koldo1]

Great Thanks a lot! I will post some pictures soon…