Black Rubber gasket for front side indicator light

[Tony.dreamer]

what do you all use as a replacement for front side indicator light gasket?. I don’t think it’s available any more !

 

[teahead]

You sure? I bought some awhile ago from ECSTuning.com

 

[Keshav]

Do you mean these ones Tony?
If so, here they are....
https://www.ebay.de/itm/BMW-E9-2-5-...214032?hash=item25f8fe6ed0:g:fpEAAOSwmfhX7jnN

 

[Tony.dreamer]

Thanks Guys !
I try both !

 

[Tony.dreamer]

You sure? I bought some awhile ago from ECSTuning.com

Thanks , I checked thier web site and deleted the 1971 2800 CS , but no parts showed up ...

 

[lsquaredb]

Do you mean the gasket between the blinker housing and the car body or the gasket between the lens and the blinker housing? When I was looking for these two years ago, the former was still available from BMW, and the latter wasn't. Somewhere on this site is a thread about using an ordinary O-ring as a gasket between the lens and the blinker housing. I tried it and it works ok, but the lens sticks out a little farther than it would with the proper gasket.

I found the posting with the o-ring:
https://www.e9coupe.com/forum/threads/some-tips.5350/#post-31941

 

[Tony.dreamer]

You sure? I bought some awhile ago from ECSTuning.com

I got it!
I got the part number and looked it up that way and ordered it from Ecs tuning
Thanks again!

 

[teahead]

I always look at realoem.com and google search the part number(s).

http://www.realoem.com/bmw/enUS/showparts?id=3425-USA-08-1970-E9-BMW-2800CS&diagId=63_0511

e.g.:

https://www.google.com/search?rlz=1......0...1c.1.64.psy-ab..0.0.0....0.WJg4ceQWc0E

or input the part number in Ecstuning.com