Body parts for 1971 - 1975 BMW 3.0 CS - CSI

d-ace

Well-Known Member
Messages
142
Reaction score
1
Location
Santa Barbara CA.
I have spare body parts from my restoration I did on my 1971 CSI BMW mostly parts I purchased for extra parts. I have two doors that were tank drop in acid then synthic latex coated plus primer coated. They do have some work needed although no dents. Also I have two original BMW fenders that still have the original color of paint on them and OEM undercoating inside. Plus a trunk lid that was tank drop in acid then synthic latex coated plus primer coated. Two rocker panel covers. And almost a complete second set of molding.

I have photos I can email you if requested and in the attachment shows one of the fenders. Also here is the car the parts were bought for >>http://shred-master.com/new_page_2.htm

Most know what these OEM BMW part go for new now days if available and I have many that are not available although used parts.

Contact me Bob if interested.
Santa Barbara Area
805-566-9154
[email protected]
 

Attachments

  • BF PD Outside.jpg
    BF PD Outside.jpg
    54.1 KB · Views: 217
Last edited:
Back
Top