Brake Bleed Screws

[decoupe]

All I could find in the various past search sites (RealOEM) for the CS brake bleed screws are part numbers - no sizes. Anyone know what size the front and rear take? Diameter, thread and length? I have a mix of 7mm and 1/4" and want to standardize.

Thanks

 

[Honolulu]

Not sure the male threads are different -they may be. Just take one along when you go to get new ones unless you're ordering online.

 

[deQuincey]

All I could find in the various past search sites (RealOEM) for the CS brake bleed screws are part numbers - no sizes. Anyone know what size the front and rear take? Diameter, thread and length? I have a mix of 7mm and 1/4" and want to standardize.

Thanks

two sizes:

for front calipers: 3 units of ref. 34111103232
M7, thread 1.0, thread length. 10mm, leght to tight base 12mm

for rear calipers: 1 unit ref. 34211103211
M7, thread 1.0, thr.length. 12mm, length to tight base 16mm

regards

 

[deQuincey]

a pic of the bleed screws

 

[decoupe]

You the man deQ!

Just the info i was looking for - thanks.

I'm looking at trying these Speed Bleeders http://www.speedbleeder.com/size.htm which have some advantages over pressure bleeding (you are pumping the MC) after replacing or modifying the brake booster for the b35 manifold conversion.

Thanks again,

Doug