aearch
Deceased
what the best way to upgrade the brakes
brakes
- Thread starter aearch
- Start date
decoupe
(deceased)
The stock brakes (discs front and rear) are very good so do the full flush and replacement of brake fluid, inspect and refurbish as necessary everything (all calipers, pipes/fittings, MC and clutch cylinders, pads and rotors etc) and that is probably all you will need for street use.
Or go shopping here http://www.iemotorsport.com/bmw/E9-E3-brakes.html
Or go shopping here http://www.iemotorsport.com/bmw/E9-E3-brakes.html
daddywad
Well-Known Member
i believe you must have 16" wheels to use these brakes. i have been told by one of the east coast BMW experts that the best way to improve the brakes on a coupe is to first replace all of the suspension bushings and tighten everything up.
uwulff
Well-Known Member
Big Brakes
I have the Wilwood kit on my 3.0csi Turbo,makes car feel safer at high speed driving.
http://www.iemotorsport.com/bmw/E9-E3-brakes.html
I have the Wilwood kit on my 3.0csi Turbo,makes car feel safer at high speed driving.
http://www.iemotorsport.com/bmw/E9-E3-brakes.html
Attachments
aearch
Deceased
options
the reason is im using an s38 engine
and i might need some additional stopping power.
yes ill need to use the stock 14 wheels
the reason is im using an s38 engine
and i might need some additional stopping power.
yes ill need to use the stock 14 wheels
aearch
Deceased
option
the reason is im using an s38 motor and may need some
more stopping power and i need the 14" wheels
the reason is im using an s38 motor and may need some
more stopping power and i need the 14" wheels
you aren't going to get a big brake kit under 14" wheels. i can appreciate the desire for more braking with an s38 under the hood. my advice is to talk to Mario at VSR for his direction.
daddywad
Well-Known Member
yes, 16" Alpinas on mine
Agreed... Especially with 14" wheels
aearch
Deceased
info
yea i sent a reQUEST TO the
big brake people
but i think it would take a whole bunch of people
for thenm to tool sets.
yea i sent a reQUEST TO the
big brake people
but i think it would take a whole bunch of people
for thenm to tool sets.