Aussiecsi
Well-Known Member
So, the ride height on my E9 is greater than I would like but the cost of CN springs with shipping and taxes is about US $700 . FWIW, my friend has CN springs on his CSL and the ride height is only about 5mm lower than mine ( which is not low enough for him either ) so not sure the risk is worth it .
Has anyone utilised their existing springs ?...I spoke to a company here in Perth and depending on the coil spacing/ pitch, they ostensibly press the coil "flat" and then re-stretch it ( presumably to the nominated length ) .If anyone has done this or has knowledge of same then would appreciate feedback ..I think I need a drop of about 20mm on the front .
This is the company I spoke to ...about US$150 to do 4 x springs https://www.boynessprings.com.au/
Has anyone utilised their existing springs ?...I spoke to a company here in Perth and depending on the coil spacing/ pitch, they ostensibly press the coil "flat" and then re-stretch it ( presumably to the nominated length ) .If anyone has done this or has knowledge of same then would appreciate feedback ..I think I need a drop of about 20mm on the front .
This is the company I spoke to ...about US$150 to do 4 x springs https://www.boynessprings.com.au/