CSi Fuel Injectors

RogerB

Well-Known Member
Messages
416
Reaction score
23
Location
Georgia USA
Anyone know if CSi fuel injectors that are leaking from the top even after the lower two rubber seals have been replaced can be rebuilt or repaired? Is there a less expensive replacement injector than the originals from W&N at $180 Euros each or $250 from the Stealer? Just trying to help a friend with a car that has been setting for quite some time. Thanks! RB
 

sfdon

Well-Known Member
Site Donor $
Site Donor $$
Messages
8,363
Reaction score
4,738
Location
sfbay area
Available at FCI in Tracy CA
Ask for Robert
50 or so with shipping I think
 

nashvillecat

Well-Known Member
Messages
115
Reaction score
7
If might help if you were a little more specific with your leak description. If it is the blue plastic that is molded to the metal injector, there isn't much you can do.

Could it be that it's the rubber tube that fits the metal portion of the injector inlet pipe that is leaking? New injectors typically have the lower portion of the tube/hose connected by a crimped metal collar. Replacement rubber with hose clamps is available.


$_1.JPG




1287010701.jpg


A91D_1_20150910524536160.jpg








Gratuitous photos

1972-collector-s-bmw-30cs-coupe-for-sale-in-st-louis-photo-gallery_26.jpg


BMW-3.0-CSi-1-1600x1090.jpg



bmw-30csl-09.jpg




bmw-30csl-11.jpg


bmw-30csl-10.jpg



The end
bmw-30csl-06.jpg
 

RogerB

Well-Known Member
Messages
416
Reaction score
23
Location
Georgia USA
Don:
  1. "Available at FCI in Tracy CA
    Ask for Robert
    50 or so with shipping I think"
I suppose that is for a rebuild?

I found this guy in Utah that says he can rebuild/repair them:

http://www.mrinjector.us/

$17.50 each plus $6.50 Priority Mail return and at present a 4 day turnaround. Anyone used him? Might be worth investing $100?!?!
 

RogerB

Well-Known Member
Messages
416
Reaction score
23
Location
Georgia USA
Cat said:
" If it is the blue plastic that is molded to the metal injector, there isn't much you can do."

It is in the general area of the blue plastic but not sure exactly where the leaks are. All the hose and clamps have been replaced.

Luv the csl pics!

Thanks for the replies! RB
 

sfdon

Well-Known Member
Site Donor $
Site Donor $$
Messages
8,363
Reaction score
4,738
Location
sfbay area
There is no repairing brittle 40 year old plastic.
I only install parts that I can trust in a car with my daughter inside.
Brand new is the answer.
Period.
 

Jahan

Well-Known Member
Messages
110
Reaction score
13
Location
Vienna, VA
I have for sale a set of 6 brand new injectors never used.. Slightly lower price than W & N with free shipping.
 

RogerB

Well-Known Member
Messages
416
Reaction score
23
Location
Georgia USA
Jahan said:

"I have for sale a set of 6 brand new injectors never used.. Slightly lower price than W & N with free shipping."

Since I did not get a PM reply, what is that price?
 
  • Like
Reactions: dp
Top