CSL in Kit Form

Rob F

Member
Site Donor
Messages
40
Reaction score
41
Location
Berkshire, UK
Finally got round to starting the CSL resto mid 2019. Now Sept 2020 and the car actually looks like a car again. Still plenty to do :)

csl near side.jpg


csl122.jpg


csl near side.jpg


csl122.jpg


csl off side.jpg


csl126.jpg


csl123.jpg


CSL front.jpg


csl127.jpg


csl rear 1.jpg


csl125.jpg


csl rear 2.jpg


csl124.jpg


Reply
Report Edit
 

Rob F

Member
Site Donor
Messages
40
Reaction score
41
Location
Berkshire, UK
Hopefully trying to get it on the road in 2021. Engine rebuilt, Gearbox rebuilt (265/6 overdrive), rear diff rebuilt, seats re-upholstered, all wood refurbished. new wiring loom. the list goes on. Just got to choose what colour to paint the car, possibly verona red
 

Attachments

  • YLIG1272.JPG
    YLIG1272.JPG
    202.4 KB · Views: 193
  • 104.jpg
    104.jpg
    71.4 KB · Views: 186
  • IMG_1405.JPG
    IMG_1405.JPG
    216.8 KB · Views: 188
  • 101.jpg
    101.jpg
    107.3 KB · Views: 186

Rob F

Member
Site Donor
Messages
40
Reaction score
41
Location
Berkshire, UK
I’m trying to fire the engine up on a jig but can’t get any voltage at the injectors when cranking the engine over.
i have 12V at pins 16 & 24 on the ECU plug with ignition on and main relay conneted. Earth on pin 11 from the ECU. I have connected cold start relay. TPS and injector trigger units have been refurbished. The only thing I haven’t connected is the fuel pump relay. Can anyone give me some pointers to solve this problem?. Could it be the ECU it’s self if so can it be tested
regards
Rob
 
Top