if you happen to misplace a guage nut,
the body trim nuts work quite well.
also if your ac heater vibrates a bunch
i found the best thing to do is bend the metal clamp, in the front,
out just a bit
to let it "float" a little
mine became much quieter.
i did add a thin piece of fabric tape also on the half round
plastic bearing seats.
the body trim nuts work quite well.
also if your ac heater vibrates a bunch
i found the best thing to do is bend the metal clamp, in the front,
out just a bit
to let it "float" a little
mine became much quieter.
i did add a thin piece of fabric tape also on the half round
plastic bearing seats.