nico13
Active Member
Hello,
Does some one know how to get the retaining clip on the distributor back in place?
Nico
Does some one know how to get the retaining clip on the distributor back in place?
Nico
distributor
- Thread starter nico13
- Start date
nico13
Active Member
Hi de Quincey,
Many thanks for the support but because of the thread I started to to replace the distributor plate. But I can not managed to get the clip on again. Maybe bade luck?
"difficult task of the assembly, this retaining clip must be fitted in the narrow side of the axis, but you must do it when the head is in its place, so you will have to operate through a narrow hole"
Any suggestions or tricks? how is bosch doing this?
Best regards,
Nico
Many thanks for the support but because of the thread I started to to replace the distributor plate. But I can not managed to get the clip on again. Maybe bade luck?
"difficult task of the assembly, this retaining clip must be fitted in the narrow side of the axis, but you must do it when the head is in its place, so you will have to operate through a narrow hole"
Any suggestions or tricks? how is bosch doing this?
Best regards,
Nico
nico13
Active Member
Hi de Quincey,
I managed it with a rod and drilled a hole in it with the size of the shaft.
Many thanks and nice pictures, I hope that now my engine will run smoother with a new distributor plate in it.
Many thanks again.
Best regards,
Nico
I managed it with a rod and drilled a hole in it with the size of the shaft.
Many thanks and nice pictures, I hope that now my engine will run smoother with a new distributor plate in it.
Many thanks again.
Best regards,
Nico
good, i did it, as i sayed in the thread, using two thin screwdrivers
nico13
Active Member
Many Thanks
Great pictures, now to the carb adjustments.
Best regards,
Nico
Great pictures, now to the carb adjustments.
Best regards,
Nico
you know that there are many threads on the particular,...right ?