door rubber

[wmnewlife]

After a year of prep and body work, the malaga 2800 CS is almost ready to paint. I will be replacing all of the door rubber and would like to know if anyone has compiled a complete list of all the pieces and any advice as to the best place to source them Thanks, Walter

 

[HB Chris]

Your only source is BMW, get part numbers from Penske then order from Tomkinson.

 

[Arde]

Your only source is BMW, get part numbers from Penske then order from Tomkinson.

And if you can return them to Penske for a refund you would have reinvented arbitrage.
If it works do not tell anybody, especially George Soros.

 

[DougE]

http://www.wallothnesch.com/ offers door gaskets but not all. The door opening set is around $365.00 per door.

I know part # 51 21 6 740 180/181 is not part of that set and is NLA from BMW. I have a friend at BMW, he said this item is on order but BMW hasn't found an acceptable manufacturer.

Go to this address, it shows what is available, http://www.wallothnesch.com/karosserie-blechteile/bmw-2-5-cs-3-0-csl-e9/katalogbild-41-14.html

 

[HB Chris]

Much cheaper at Tomkinson, around $225 each for the big seal.

 

[wmnewlife]

Thanks for all the input guys i'll post pics as the paint proceeds. Right now the doors, hood and trunklid are off, and the prep is almost done.

 

[rsporsche]

Hey Walter ... looking forward to seeing the transformation of your coupe.

 

[scottemo]

http://www.coupeguy.com/originalequiprubber.htm